No Ripper?  No Problem!

Walk 'n' Roll parallel lift, Heavy Duty Lift Assembly

Click to Enlarge

The Walk 'n' Roll Heavy Duty,  PARALLEL LIFT, Lift Assembly attaches to the  motor grader like a factory rear ripper.  It uses the same bolt pattern so there is no welding or holes to drill to mount the lift assembly.  The lift assembly requires an extra valve and hydraulics to the rear of the motor grader.

Click to Enlarge
This photo shows the QUICK-ATTACH capabilities of the Lift Assembly.  Remove the locking pins on the Quick-Attach, back the grader into the quick attach, insert the locking pins, raise and lock the jack stands and go to work.
The Quick-Attach and the Accumulator are standard equipment on our Lift Assembly and optional on the ripper equiped graders.
The Quick-Attach brackets are mounted on the Walk ‘n’ Roll packer and the ripper receivers are loose and can be manually placed in the ripper pocket. The Quick-Attach is a Walk 'n' Roll exclusive.


The Accumulator will provide four & one half inches of compression for precise control of down pressure while compacting.  This feature will prevent bridging and eliminate unnecessary tire wear.

Click to Enlarge

Watch Our Video
Blade and compact roads in one operation
See the WR75 Walk 'n' Roll in action.

Toll Free: 866-865-1936
Phone: 406-294-1936
6508 South Frontage Road
Billings, MT 59101

The Walk 'n' Roll packer/roller is