Specifications:
3 packing widths, 8 different models to choose from
|
|
|
WR75 Series3 Walk'n'Roll packer/roller
1. 75" packing width.
2. Heavy 12" X 6" single beam main frame with high arch gooseneck
3. Five heavy duty independent walking beams
4. 2" X 12" hardened steel pivot pins
5. Five inches of bushing.
6. Ten easy access 7.50 X 15 smooth rolller tires
7. Individual 6,000 lb. hubs with square spindles
8. Five easy to reach grease zerks.
9. Machine weight not to exceed 3,000 lbs.
10. Must be manufatured in the United States of America |
|
|
|
WR90 Series 3 Walk 'n' Roll packer/roller
1. 90" packing width.
2. Heavy 12" X 6" single beam main frame with high arch gooseneck
3. Six heavy duty independent walking beams
4. 2" X 12" hardened steel pivot pins
5. Five inches of bushing.
6. Twelve easy access 7.50 X 15 smooth roller tires
7. Individual 6,000 lb. hubs with square spindles
8. Six easy to reach grease zerks.
9. Machine weight not to exceed 3,500 lbs.
10. Must be manufatured in the United States of America
|
|
|
|
We build a WR75-30R that has the same specifications as a WR75 except it has a 30" RH Hydraulic Side-Shift
|
|
|
WR105 Series 3 Walk'n' Roll packer/roller
1. 105" packing width.
2. Heavy 12" X 6" single beam main frame with high arch gooseneck
3. Seven heavy duty independent walking beams
4. 2" X 12" hardened steel pivot pins
5. Five inches of bushing.
6. Fourteen easy access 7.50 X 15 smooth roller tires
7. Individual 6,000 lb. hubs with square spindles.
8. Seven easy to reach grease zerks.
9. Machine weight not to exceed 4,000 lbs.
10. Must be manufatured in the United States of America
|
|
|
WR90 Series 3 Hydra-Slide Walk 'n' Roll packer/roller
1. 90" packing width.
2. Heavy 12" X 6" single beam main frame with high arch gooseneck
3. Six heavy duty independent walking beams
4. 2" X 12" hardened steel pivot pins
5. Five inches of bushing.
6. Twelve easy access 7.50 X 15 smooth roller tires
7. Individual 6,000 lb. hubs with square spindles.
8. Six easy to reach grease zerks.
9. Machine weight not to exceed 3,800 lbs.
10. 24" Right or Left Hydraulic Side-Shift
11. Must be manufatured in the United States of America |
|
|
|
We build a WR90R-36 that has the same specifications as a WR90RL-24 except it has a 36" RH Hydraulic Side-Shift
|
|
|
WR90 Series 3 Walk 'n' Roll Oscillator
1. 90" packing width.
2. Heavy 12" X 6" two piece sub frame with high arch gooseneck
3. Six heavy duty independent walking beams
4. 2" X 12" hardened steel pivot pins
5. Five inches of bushing.
6. Twelve easy access 7.50 X 15 smooth roller tires
7. Individual 6,000 lb. hubswith square spindles.
8. Eight easy to reach grease zerks
9. Machine weight not to exceed 3,450 lbs
10. Machine must be manufactured in the United States of America.
|
|
|
Parallel Lift Assembly in lieu of a rear ripper
1. Must be parallel lift so all tires make contact with road surface at the same time.
2. Must have Quick-Attach for removal of the packer from the lift assembly
3. Must mount to the grader without welds or holes to drill.
4. Must have an accumulator capable of setting to a minimum of 1,000 psi.
5. Lift cylinder must have a burst pressure of 6,000 psi.
6. Must be manufactured in the United States of America. |
|
|
|
|
We build a Hydraulic Side-Shift for a WR90 Series 3 Walk 'n' Roll Oscillator for large motor graders like a 14G, H or M Caterpillar or equal.
|
|
|
